need help from you guys.. but you gotta have a multimeter and a OEM kicker sub/amp [Archive] - Mopar Nation

Todd

12-30-2009, 09:24 PM

ok long story short your charger trunk kicker amp has 200 watts our 300 ones have 100 watts so basically we want to adapt the charger amp into our 300 kicker systems. I think i have narrowed the wiring down but any help is greatly appreciated. basically what i need someone to do is probe some wires right after the plastic connector on the amp (the connector that goes to the cars harness) and tell me the color code with what it is. red with white stripe is positive etc etc... crazy but the connectors on the charger and 300 kicker sub amps are different charger amp has more wires.

i think i have it figured out per pin on the charger amp but would love to know by wire color.
here is what i think i know:
pins:
4&5 are posiitve
6&7 negative
2+ signal 3- signal. i guess when the connector is disconnected above or below the pins there are little numbers.

thanks guys in advance

Krazy Kim

12-31-2009, 06:04 PM

We don't have one in the Charger, but we do in the Challenger. I don't know if they're the same.

Bill checked the Haynes Manual and it doesn't show it.